|
Saike 852D+ is 2 in 1 SMD Rework station, Saike 852D+ soldering Iron with LED indicator, 220V Saike 852D+ 2 in 1 hot air rework station Iron with LED digital display accurancy 1°C.
SAIKE 852D+ Digital hot Air Rework station Soldering Iron
Features:
Sensor close loop, micro-computer over "0" control, LED indicator,
big power, fast temperature rising, accurate temperature, not
affected by wind volume.
Wind volume is adjustable, suitable for many kinds of use.
Induction switch on hand held, when you grasp hand held, it will
work, and when you put it down, it will stop work.
Auto cold wind function
Brushless wind motor, long life and low noise.
Suitable for SOIC, CHIP, QFP, PLCC, BGA, heating shrink, drying,
lacquer removal, viscidity removal, ice-out,pre-heating and glue
soldering.
LED digital display accurancy 1°C
Consumption:400W
Air mode:brushless soft wind
Air volume:120L/minute(max.)
Temperature range:100-450°C
Handheld part length:120cm
Main body: 13.8cmX10cmX15cm
Noise<45dB
SAIKE 852D+ Hot Air Gun Station Specification:
MODEL | Rated Voltage | Power Consumption | Air Pump | Air Flow | Temp.Control | Length of Handle | Noise |
852D | AV110V/220V 50Hz/60Hz | 400w | Non-Brushes Motor Soft airflow | 120L/min(Max) | 100-450 | 120cm | <45db |
Soldering Iron Specification | ||||
Power Consumption | Out Voltage | Temp.Control | Ground Resistance | Heater Element |
60W | 24V AC | 200-480 | <2 | Ceramic |
![]() |
SAIKE 852D+ Digital hot Air Rework station Soldering Iron Images |